Hi people,
I'm currently working on the LPC2468 board from Embedded Artists. This is an overview of the board and processor:
LPC2468
- Processor ARM7TDMI-S core with speed up to 72 MHz
- 512 KB internal flash
- 98 KB RAM
- 4xUART, 3xI2C, 2xCAN, 1xSPI, 2xSSP, 1xI2S
- Full-Speed USB 2.0 Device/Host/OTG
- 10/100 Ethernet MAC
Board
- 128 MB NAND + 4 MB NOR
- 32 MB SDRAM
- 256 Kbit I2C E2PROM
It's an "old" board that runs uClinux instead of Linux. It comes with u-boot. So, I'm learning how it works and how develop device drivers for it. In the nexts posts I'll show you what I'm doing with this little board!
Marcelo Jo
I'm currently working on the LPC2468 board from Embedded Artists. This is an overview of the board and processor:
LPC2468
- Processor ARM7TDMI-S core with speed up to 72 MHz
- 512 KB internal flash
- 98 KB RAM
- 4xUART, 3xI2C, 2xCAN, 1xSPI, 2xSSP, 1xI2S
- Full-Speed USB 2.0 Device/Host/OTG
- 10/100 Ethernet MAC
Board
- 128 MB NAND + 4 MB NOR
- 32 MB SDRAM
- 256 Kbit I2C E2PROM
It's an "old" board that runs uClinux instead of Linux. It comes with u-boot. So, I'm learning how it works and how develop device drivers for it. In the nexts posts I'll show you what I'm doing with this little board!
Marcelo Jo
No comments:
Post a Comment